This kit allows you to pass through six signal wires into fuel tanks to power single, or dual pumps and a level sender, through a specified fitting.
COMING SOON are weld-in and unique bolt-in style fittings, snap ring, etc to use with these parts for a complete installation as an all-in-one kit, so stay tuned for an upcoming announcement.
Thru 8/14/2020 take $5 off this bulkhead kit with coupon code JULBULK
These injectors flow 60 lbs/hr at 43.5 PSI (3 BAR) and up to 85 lbs/hr at 87 PSI! Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
Thru 8/7/2020, take 15% off these injectors using the coupon code DEKA7
Now is a great time to pick up a spare oxygen sensor, replace an aging sensor, or get that upgraded sensor you’ve had your eye on!
We carry wideband O2 sensors for most wideband systems. Don’t let a dead sensor stop your dyno, tuning, or wideband monitoring in its tracks!
O2 Sensors are 5% off through 7/31 with coupon code JUNEO2
The DT / AT connector system provides a great option for all your custom multi-pin connector needs. With their compact size, superb environmental sealing, and stout housing design, they have boundless utility for all 20-16awg wiring projects.
Kit comes with 2, 3, 4, 6, 8 and 12 way male & female connectors, male/female contacts, cavity plugs, wedgelocks, tooling and mounting tabs. Ratcheting Crimp tool available as an discounted add-on.
Thru 7/17 take $25 off this master kit with coupon code JUNEKIT
This relay kit is offered at a lower price than the previous pull-to-seat version, and uses the much more recent TE MCP 6.3 (Multiple contact point 6.3mm) series for a cost effective push to seat relay base over the Metri-Pack 630 pull to seat style.
Thru 7/3/2020 take 10% off these relay kits with coupon code TE630
We are offering this 3 piece tool kit at $5 off this month! Featuring a Metri-Pack thin blade, thick blade, and Weatherpack removal tool, you can disassemble all parts in the series with ease. We use these same tools internally and in the field for most of our terminal removal needs for connectors on Toyota, Honda, Nissan, and many others as well. These are more than GM specific tools!
Thru 7/3/20 take $5 off these tool kits with coupon code 5TOOL
Fluid and air temp sensors are essential to the proper function and performance of your vehicle. For the month of June, all are 10% off from Ballenger Motorsports! Now is the perfect time to stock up on these parts for your shop, your project, or your personal vehicle.
Thru 6/26/2020 take 10% off these sensors with coupon code TEMP5
This month we are featuring the Bosch Motorsports KS4-P knock sensor, perfect for use in extreme conditions to detect structural vibrations in engines due to uncontrolled combustion or “knock” events. Also available in bundles with connector kits or pigtails and mounting bolts to correlate with your needs!
Thru 6/19/20, take 10% off these sensors and kits with coupon code 5KNOCK
Our PPE Gear supply has finally caught up with demand for specific items. We have KN95 masks, Face Shields, & Gowns in stock now in our general public use area here:
https://www.vacovidsupplies.com
We also have a reserved medical use only section of the website for medical workers, first responders, & elder care facilities. We are working to keep these items at cost while the general public items are marked up to account for shortfalls we’ve experienced while importing this PPE Gear at cost for those in need.
The IGN1A Coil is your go-to product when nothing else will do. This coil has proven itself countless times in the field with some of the most powerful engines & best tuners.
The IGN1A is one of the few ignition options for 2500+ HP Methanol applications. It offers the perfect combination of extremely high spark energy and long spark duration. These smart coils need no external ignitor and can be controlled by most ECUs.
Thru 6/12/2020 take 10% off these Coils with coupon code MAYIGN
Don’t limit yourself only to fuel injectors that match your stock connectors! With our wide array of adapter harnesses, you can pick the exact fuel injectors to suit your needs and still bridge the connection with your stock connectors. We have an adapter for all of the most popular injector connector formats. Made in the USA in our facility!
Thru 6/5/20, take 10% off these adapters with coupon code ADAPT5
We are now stocking connectors, kits, and pigtails for this genuine OEM transmission connector found on many GM 6-speed automatic transmissions from 2007-newer engine harnesses. Commonly used with GM Vortec LS-Series, LS1, LS2, LS3, and LSA engines.
Thru 5/22/2020 take 10% off these connectors with coupon code APRCONN
We are arranging PPE Gear to critical locations and we can use all the help you can provide! Please see our fundraiser with details, instructions, & contact information on how to help medical workers, first responders, & elder care workers who are in critical need!
Everything from donations, volunteer work, 3D prints, & more will go a long way to helping those on the front lines putting their lives at risk for us.
The Autosport Labs Linear Fluid Temperature Sensor offers a linear response of 10mv/C for easy calibration with a simple conversion formula. Only ground, 5v, and output connections are required, with no pullup resistor needed – similar to other active sensors. Suitable for fluids such as oil, coolant and water, this has proven to be a very popular addition to our catalog!
Through 5/8/2020 take 5% off this sensor with coupon code LINTEMP
Pushing the limits of horsepower often creates high exhaust gas temperatures (EGT). If you’re running a rotary engine, methanol/alcohol or similar race fuels, or are simply installing a wideband sensor in a high EGT location then this Heat Sink Bung Extender can extend your wideband sensor life. The smaller orifice of this bung extender can also help installations that regularly see exhaust backfires, Anti-lag systems, launch systems, and multi-step launch/limiter systems. Works with Bosch LSU 4.0, 4.2, 4.9, & NTK Wideband Sensors. Help preserve your investment by pairing with this heat-sink bung extender to get accurate readings while minimizing sensor damage! Competing products are now being made in China but ours is still 100% made in USA!
Thru 3/27/2020 take 20% off the HBX-1 with coupon code 2HEAT
Fluid and air temp sensors are essential to the proper function and performance of your vehicle. All of our temperature sensors are on sale this month! Get a great deal on any quantity, and bundle in mounting hardware and mating connectors!
Thru 3/20/2020 take 10% off this tool kit with coupon code FEBTEMP
NTK Calibration Grade Sensors represent the best balance of performance capabilities and price for wideband O2 systems. Used with the AFR500v2 / AFX wideband family, this sensor is ideal for turbo and supercharged applications using e85, e100, methanol, and other alcohol derived fuels. Also a replacement for all L1H1 and L2H2 applications. Grab some before race season with this great promotion!
Thru 3/13/2020 take 15% off these connectors with coupon code CALFEB
NTK Calibration Grade Wideband O2 Sensors for AFR500 and Custom Applications
These injectors flow 46.5 lbs/hr at 43.5 PSI (3 BAR) and much more at higher PSI! Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. These units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors represent the most current Siemens DEKA engineering and are used on many high power turbo and supercharged oem applications.
Through 3/6/2020 take 10% off these injectors with coupon code FEBDEKA
This handy multi-purpose tool crimps Weather-Pack terminals and seals, and the most popular sealed Metri-Pack 150, 280, 480 and 630 Series. Its compact, low-cost parallel jaw design eliminates terminal rocking.
Thru 2/21/2020 take $5 off these crimpers with coupon code 1CRIMP
Crimper for Weather-Pack and Metri-Pack 159, 280, 480 and 630 for 24-14 AWG
We are offering this 3 piece tool kit at $5 off this month! Featuring a Metri-Pack thin blade, thick blade, and Weatherpack removal tool, you can disassemble all parts in the series with ease. We use these same tools internally and in the field for most of our terminal removal needs for connectors on Toyota, Honda, Nissan, and many others as well. These are more than GM specific tools!
Thru 2/14/2020 take $5 off this tool kit with coupon code 1REMOVE