With the ntk sensor option for the afr500, can I swap the extension cable from left header to right header of my fast xfi equipped engine with moving the sensors?
The AFR500 can use the same NTK sensors that the FAST XFI came with. If your FAST XFI came with the NTK sensor, you should be able to interchange which sensor you are using for which application. Keep in mind you should never have a sensor unpowered in an exhaust stream however as it can damage a sensor rapidly.
We do have the mating connection for the 6 way Ford/Mazda MAF Connector (CONN-100697). The parts are listed below:
Connector Only CONN-100716
Terminals CONN-100703
Connector Kit CONN-75841
Connector Pigtail CONN-85841
Yes. Our blog is not checked for order cancellations or customer service issues specifically. We have our phone and email listed on our website for that purpose. I see you put this up at 1am and sent an email thereafter. We canceled the order per your email first thing in the morning on April 8th.
Typically 1-5 days. USPS services have some variability in them. We offer shipping classes and pricing on our shop website here http://www.bmotorsports.com/shop/ .
Looking for a 5.9 Dodge throttle position sensor connector.
6 way connector # 100-409 looks very close.
do you know if this is a fit and do you have the terminals to go with?
or a pig tail?
Where does # 100-409 come from? Does your TPS have one row of 6 terminals or two rows of 3 terminals? We carry both parts. We have the connector housings, terminals, seals, and pigtails.
Hi . I had order and received parts for SNSR-03085 and Invoice # BM-892443. Actually its is wrong and not fit my bikes. Actual parts I need is 0 261 230 030. But what I received is 0 281 002 845. What shall I do?
Our blog is not the best place or method to receive timely support as we do not check the comments here on a daily basis. Our sales@bmotorsports.com is the best contact for support or by phone.
I don’t see a purchase from your email with us, so I can’t locate which 750cc injectors you have. Your best option is to get the part number for the injectors you have and to contact RC directly at http://www.rcfuelinjection.com/
With the ntk sensor option for the afr500, can I swap the extension cable from left header to right header of my fast xfi equipped engine with moving the sensors?
thanks
In my last post that was without moving o2 sensors.
thanks
The AFR500 can use the same NTK sensors that the FAST XFI came with. If your FAST XFI came with the NTK sensor, you should be able to interchange which sensor you are using for which application. Keep in mind you should never have a sensor unpowered in an exhaust stream however as it can damage a sensor rapidly.
do you have the male end connector for a ford 6 pin MAF sensor?
We do have the mating connection for the 6 way Ford/Mazda MAF Connector (CONN-100697). The parts are listed below:
Connector Only CONN-100716
Terminals CONN-100703
Connector Kit CONN-75841
Connector Pigtail CONN-85841
I need a parts for a Nissan motor GX4000 generator.I need a coil starting for one piston motor.Thanks Carlos
We aren’t sure what part you are looking at but we have a guide so you can provide the information we need to move forward -> http://news.bmotorsports.com/part-identification-guide/
can i cancel a order not yet shipped and payment has not been received yet?
Yes. Our blog is not checked for order cancellations or customer service issues specifically. We have our phone and email listed on our website for that purpose. I see you put this up at 1am and sent an email thereafter. We canceled the order per your email first thing in the morning on April 8th.
How long for shipping to thailand via USPS Priority Mail Express Internationalâ„¢
Typically 1-5 days. USPS services have some variability in them. We offer shipping classes and pricing on our shop website here http://www.bmotorsports.com/shop/ .
Looking for a 5.9 Dodge throttle position sensor connector.
6 way connector # 100-409 looks very close.
do you know if this is a fit and do you have the terminals to go with?
or a pig tail?
Where does # 100-409 come from? Does your TPS have one row of 6 terminals or two rows of 3 terminals? We carry both parts. We have the connector housings, terminals, seals, and pigtails.
What is your warranty on the Delphi 17113698 Fuel Injectors?
Delphi 17113698 fuel injectors fall under our standard return policy as listed here: https://www.bmotorsports.com/shop/conditions.php .
The short summary is:
Return for refund within: 30 days
Return for replacement within: 1 year
Hi . I had order and received parts for SNSR-03085 and Invoice # BM-892443. Actually its is wrong and not fit my bikes. Actual parts I need is 0 261 230 030. But what I received is 0 281 002 845. What shall I do?
Our blog is not the best place or method to receive timely support as we do not check the comments here on a daily basis. Our sales@bmotorsports.com is the best contact for support or by phone.
What bike is this for? 0 261 230 030 is a 1 bar sensor, SNSR-03091 ( https://www.bmotorsports.com/shop/product_info.php/products_id/2270 ). Why did you order a 3 bar sensor meant for turbocharged or supercharged applications?
I bought a set of Rc engineering 750cc injectors and will like to see if I can get the chart to input it in to my hp tunners
I don’t see a purchase from your email with us, so I can’t locate which 750cc injectors you have. Your best option is to get the part number for the injectors you have and to contact RC directly at http://www.rcfuelinjection.com/
Do u have any phone number to call
Our contact information is listed here: https://www.bmotorsports.com/shop/contact_us.php where you can email or call us.
Do you have instructions on how to depin and repin the Kostal 4 way female connector (part # CONN-86029)?
I have to replace a connector in my car. I want to make sure it’s possible before I order. If it’s not possible will I need to order pigtails?
We often use two of TOOL-02001. There is a more specific tool but it is more expensive. TOOL-02026 is also a good option.
You need to depress the metal tangs on both side of the Kostal terminals as seen with CONN-11581.