These injectors flow 80 lbs/hr at 43.5 PSI (3 BAR) and even more at greater PSI! Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. These units are high-impedance, making them compatible with most ECUs These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors – making them very well suited to turbocharged and supercharged applications that see high fuel system pressures.
Thru 8/26 take 15% off these injectors with coupon code 7DEKA
Genuine TE AMP 1.3 mm three contact beam lanceless stamped & formed contact system for applications like the AiM PDM08 and PDM32, Hydraforce ECU-0809A, MS3pro EVO gen1, Microsquirt, and other devices. Gold plated for maximum current rating of up to 17 Amps.
Thru 7/15 take 10% off these terminals with coupon code AMP6
This adapter breaks out the IAT signal from the MAF sensor on Subaru WRX 2008+ EJ255, and 2015+ STi EJ257 engines to relocate to intercooler piping for more accurate plenum temperature, as opposed to ambient intake temperature. Made with hi-temp nylon braided sleeving, genuine OEM connector plugs, seals, cavity plugs & terminals, manufactured and assembled at our facility in the US. (pictured w/ EV1 connector – other options available!)
Thru 7/8 take 10% off these harnesses with coupon code 6SUBIE
The IGN1A Coil is your go-to product when nothing else will do. This coil has proven itself countless times in the field with some of the most powerful engines & best tuners. The IGN1A is one of the few ignition options for 2500+ HP Methanol applications. It offers the perfect combination of extremely high spark energy and long spark duration. These smart coils need no external ignitor and can be controlled by most ECUs.
Thru 5/20 take 15% off these coils with coupon code IGN1A4
This is the Genuine Deutsch Mil / Solid Contact Crimper, HDT-48-00 [ HDT4800 ] also sold as Harley Davidson tool HD-42879. This eight indent hand crimper works with the the Solid Deutsch contacts in sizes 20 – 12 (24 AWG – 12 AWG) for most Deutsch series including DT, DTM, DTP, DTHD, HDP, Jiffy splices and many others.
Thru 5/6 take $30 off this crimp tool with coupon code 4HDT
This Genuine Bosch 3.5 bar sensor is used in vehicles worldwide and regarded by many as the most accurate and precise volume production sensor. Bosch has hinted at discontinuing this variant, come and get some while supplies are plentiful with this March deal! Pair this 3.5bar Bosch TMAP sensor with CONN-85824 for a plug and play solution for your Mazdaspeed3/6, CX-7
Thru 4/22 take 15% off these sensors with coupon code TMAP3
This month we are featuring the Bosch Motorsports KS4-P knock sensor, perfect for use in extreme conditions to detect structural vibrations in engines due to uncontrolled combustion or “knock” events. Also available in bundles with connector kits or pigtails and mounting bolts to correlate with your needs!
Thru 4/15 take 15% off these sensors & kits with coupon code 3KNOCK
Ultra-Compact, high flow injector at just 48mm end to end! These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
Thru 4/8 take 10% off these injectors with coupon code 3DEKA22
This Genuine GM/Bosch sensor is used in vehicles worldwide and regarded by many as the most accurate and precise volume production sensor for naturally aspirated vehicles and engines. Commonly used on LS3 & other normally aspirated GM engines, Ecotec, and the following engine codes(market depending): LFX, LFY, LFR, LLT, LY7, LE9, LS3
Thru 3/25/22 take 15% off these sensors with coupon code 2LS3
This slim profie, 1/8″ thread fluid / coolant temp sensor is the perfect option for projects and builds with limited space! Works with most aftermarket ECU’s on the market such as Haltech, Electromotive, Autronic, Bigstuff3, and matches AEM sensor number 30-2012. This very common sensor has hundreds of other applications!
Thru 3/18/22 take 15% off these sensors with coupon code FEBCLT
The NTK UEGO Sensor is a high quality replacement sensor for the NGK Powerdex AFX & Ballenger Motorsports AFR500. Some tuners swear by this sensor; that this sensor lasts longer and maintains greater accuracy over the life of the sensor. The NTK is more tolerant of leaded & exotic fuels than Bosch alternatives. Make sure you use the right sensor in the right situation!
Thru 3/11/22 take 10% off these sensors with coupon code 2NTK
These alternate Bosch 3 Bar TMAP sensors are used in Ford Ecoboost 1.0 / 2.3L engines in the Focus SE and Focus RS, as well as many other Ford applications and some Aston Martin and McLaren. 3 bar Map sensors are not intended for naturally aspirated applications. Thru 2/25/22 take 10% off these sensors with coupon code JANTMAP
This month features another Ballenger Motorsports exclusive, designed and engineered in house! This kit allows you to pass through six signal wires into fuel tanks to power single, or dual pumps and a level sender, through our specified bolt-in style fitting.
Thru 2/11/22 take 15% off these bolt-in kits with coupon code 1BOLT
AMP/TE SuperSeal 1.0mm now have a solid contact solution! Perfect for your professional MoTec / Haltech / Holley Dominator harness builds and installation. Also works for some Ford and Dodge PCM connectors! Adds an expert touch to an otherwise normal stamped and formed termination harness. Rennstieg crimp dies also available here!
Thru 12/10 take 10% off these contacts with coupon code 11SS10
3 Way Coil Connector Plug With Keyway D for Supercharged Ford GT500 Coyote Engines! Used on keyway D variant ignition coil applications on some Ford applications, often Dodge FCA group and Mercedes Benz. Often times one of the three cavities is blocked off in the connector mold or with a cavity plug.
Thru 12/3 take 15% off these pigtails with coupon code 11KEYD
This new sensor offering from Honeywell replaces earlier generation brass sensors and large, bulky stainless options to provide a compact, stainless sensor body and membrane available in pressure ranges up to 500 PSIG. Suitable for fuel use! Comparable in performance to other stainless sensors, with a much more affordable price point!
Thru 11/5, take 10% off these sensors with coupon code OCTPXL
These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a high-impedance injector.
Thru 10/15 take 15% off these adapters with coupon code 60DEKA
We are now offering refills for the Deutsch DT / DTM master kits which include connectors, front locks, cavity plugs, contacts & mounting clips. No case or removal tool included. Save on shipping if you no longer need a case or have your own!
Thru 10/8 use the following coupon codes: REFILLDT for $25.00 off the DT kit, orREFILLDTM for $25.00 off the DTM kit